EduTutor AI

Trigonometric ratios made simple, for Class 10

What sin, cos and tan actually mean, the standard-angle table you must know by heart, and how boards test heights and distances.

The idea in one line

In a right-angled triangle, the ratio between any two sides depends only on the angles — not on how big the triangle is. That is the whole of trigonometry in one sentence.

Draw a right-angled triangle with a 30° angle. Draw another one twice the size, still with a 30° angle. The sides are all twice as long, so any ratio of two sides is unchanged. That fixed ratio is what we name sin, cos and tan.

Naming the sides

Always name the sides relative to the angle you are working with.

  • Hypotenuse — the side opposite the right angle. It never changes.
  • Opposite — the side facing the angle you are using.
  • Adjacent — the remaining side, next to your angle.

The opposite and adjacent sides swap over when you switch angles. This is the single most common source of error, so mark your angle on the diagram before you write anything.

Then:

  • sin θ = opposite / hypotenuse
  • cos θ = adjacent / hypotenuse
  • tan θ = opposite / adjacent

Most students remember this as SOH-CAH-TOA. The reciprocals follow: cosec θ = 1/sin θ, sec θ = 1/cos θ, cot θ = 1/tan θ.

The table you must know

You will use these in nearly every question, and there is no time to derive them in an exam.

θ 0° 30° 45° 60° 90°
sin θ 0 1/2 1/√2 √3/2 1
cos θ 1 √3/2 1/√2 1/2 0
tan θ 0 1/√3 1 √3 not defined

Notice the pattern: sin goes 0, 1/2, 1/√2, √3/2, 1 and cos is the same list backwards. If you can write the sin row, you get the cos row free, and tan is just sin ÷ cos.

The identities

Three identities cover almost every proof question:

  • sin²θ + cos²θ = 1
  • 1 + tan²θ = sec²θ
  • 1 + cot²θ = cosec²θ

The second and third come from the first. Divide sin²θ + cos²θ = 1 by cos²θ and you get tan²θ + 1 = sec²θ. Divide by sin²θ instead and you get 1 + cot²θ = cosec²θ. Knowing they are the same identity in disguise means you only have to remember one.

Heights and distances

This is where the marks are. The wording is standard, so learn what each phrase means on a diagram.

Angle of elevation — you are looking up; the angle is measured from the horizontal up to your line of sight.

Angle of depression — you are looking down from a height; measured from the horizontal down to the line of sight. On a diagram it is equal to the angle of elevation from the other end, because the two horizontals are parallel. Using that fact turns most depression questions into elevation ones.

Forgetting to add the observer's height is the most common way to lose a mark in that question. If the question gives you somebody's height, it is there to be used.

Show answer

Let the height be h and the original distance be x.

From the first position: tan 30° = h / x, so x = h√3.

From the second: tan 60° = h / (x − 30), so x − 30 = h/√3.

Substitute: h√3 − 30 = h/√3.

Multiply through by √3: 3h − 30√3 = h, so 2h = 30√3, giving h = 15√3 ≈ 25.98 m.

How to avoid the usual mistakes

Label the diagram before you write an equation. Mark the right angle, the given angle, and which side is which. Half of all lost marks in this chapter come from mixing up opposite and adjacent.

Keep surds until the last step. Write 15√3 and only convert to 25.98 at the end, and only if the question asks for a decimal. Rounding early throws the final answer off.

Check your answer is sensible. A tower is not 3 m tall and a river is not 4 km wide. If the number looks wrong, you have probably used tan where you needed sin.

Write the ratio you are using. Even if the arithmetic goes astray, "tan 60° = h/20" on the page earns method marks.

Stuck on this in your own textbook?

Ask our tutor about this chapter and get an answer drawn from the book your board actually prescribes, with the passage cited.

Try a lesson free

More guides

EduTutor AI

Textbook-accurate tutoring for CBSE, ICSE and state board students, with every answer traced back to the chapter it came from.

© 2026 EduTutor AI. Written and maintained in India.